Emerald Coast XL2 Sport
| XL2 | |
|---|---|
| Role | Powered parachute |
| National origin | United States |
| Manufacturer | Emerald Coast Aircraft |
| Introduction | 2000 |
| Status | Production completed |
The Emerald Coast XL2 Sport is an American powered parachute that was designed and produced by Emerald Coast Aircraft.[1]
The aircraft is no longer in production.
Design and development
[edit]The aircraft was designed as a US FAR 103 Ultralight Vehicles two-seat trainer. It features a parachute-style high-wing, two seats in tandem, tricycle landing gear and a single 50 hp (37 kW) Rotax 503 engine in pusher configuration.[1]
The aircraft is built from a combination of bolted and welded 4130 steel tubing. In flight steering is accomplished via foot pedals that actuate the canopy brakes via a 2:1 ratio block system, creating roll and yaw. On the ground the aircraft has lever-controlled nosewheel steering. The main landing gear incorporates sprung steel landing gear with large tundra tires.[1]
When it was in production the XL2 was supplied in a number of forms. It could be purchased as a fully assembled and test flown aircraft, for US$9000 in 2003. It was also available as a just the basic carriage for US$3000 in 2003, with the buyer supplying his or her own canopy, instruments, engine and propeller. The company also built custom versions to order.[1]
Specifications (XL2 Sport)
[edit]Data from Cliche[1]
General characteristics
- Crew: one
- Capacity: one passenger
- Wing area: 550 sq ft (51 m2)
- Empty weight: 289 lb (131 kg)
- Fuel capacity: 10 U.S. gallons (38 L; 8.3 imp gal)
- Powerplant: 1 × Rotax 503 twin cylinder, two-stroke, air-cooled aircraft engine, 50 hp (37 kW)
Performance
- Cruise speed: 28 mph (45 km/h, 24 kn)
- Rate of climb: 700 ft/min (3.6 m/s)