Flame retardant: Difference between revisions
No edit summary |
No edit summary |
||
Line 2: | Line 2: | ||
[[Image:FlameRetardantSocks.jpg|right|thumb|Socks made from flame retardant cotton.]] |
[[Image:FlameRetardantSocks.jpg|right|thumb|Socks made from flame retardant cotton.]] |
||
'''Flame retardants''' are materials tskadjf lksdjf inhibit or resist the spread of [[fire]]. These can be separated into several categories: |
'''Flame retardants''' are materials tskadjf lksdjf blaine akin inhibit or resist the spread of [[fire]]. These can be separated into several categories: |
||
*Minerals such as [[asbestos]], compounds such as [[aluminium hydroxide]], [[magnesium hydroxide]], [[antimony trioxide]], various [[hydrate]]s, [[red phosphorus]], and [[boron]] compounds, mostly [[borate]]s. |
*Minerals such as [[asbestos]], compounds such as [[aluminium hydroxide]], [[magnesium hydroxide]], [[antimony trioxide]], various [[hydrate]]s, [[red phosphorus]], and [[boron]] compounds, mostly [[borate]]s. |
||
*[[Tetrakis(hydroxymethyl)phosphonium chloride|Tetrakis(hydroxymethyl)phosphonium salts]], made by passing [[phosphine]] gas through a solution of [[formaldehyde]] and a [[mineral acid]] such as [[hydrochloric acid]], are used as flame retardants for [[textile]]s. |
*[[Tetrakis(hydroxymethyl)phosphonium chloride|Tetrakis(hydroxymethyl)phosphonium salts]], made by passing [[phosphine]] gas through a solution of [[formaldehyde]] and a [[mineral acid]] such as [[hydrochloric acid]], are used as flame retardants for [[textile]]s. |
Revision as of 19:53, 18 May 2009
Flame retardants are materials tskadjf lksdjf blaine akin inhibit or resist the spread of fire. These can be separated into several categories:
- Minerals such as asbestos, compounds such as aluminium hydroxide, magnesium hydroxide, antimony trioxide, various hydrates, red phosphorus, and boron compounds, mostly borates.
- Tetrakis(hydroxymethyl)phosphonium salts, made by passing phosphine gas through a solution of formaldehyde and a mineral acid such as hydrochloric acid, are used as flame retardants for textiles.
- Synthetic materials, usually halocarbons. These include organochlorines such as polychlorinated biphenyls (PCBs), chlorendic acid derivates (most often dibutyl chlorendate and dimethyl chlorendate) and chlorinated paraffins; organobromines such as polybrominated diphenyl ether (PBDEs), which be further broken down into pentabromodiphenyl ether (pentaBDE), octabromodiphenyl ether (octaBDE), decabromodiphenyl ether (decaBDE) and hexabromocyclododecane (HBCD); organophosphates in the form of halogenated phosphorus compounds such as tri-o-cresyl phosphate, tris(2,3-dibromopropyl) phosphate (TRIS), bis(2,3-dibromopropyl) phosphate, tris(1-aziridinyl)-phosphine oxide (TEPA), and others.
Many of these chemicals are considered harmful, having been linked to liver, thyroid, reproductive/developmental, and neurological effects.[1] PCBs were banned in 1977[2] and the EU has banned several types of brominated flame retardants as of 2008,[3] following evidence beginning in 1998 that the chemicals were accumulating in human breast milk.[4] Currently some US states and various countries are investigating PBDEs as well; of the major ones only decaBDE remains on the North American market.[3]
Aside from various conventional alternatives such as antimony or phosphorus-based retardants which have toxicological problems of their own, Environmental Health Perspectives surveys the halogen-free alternatives being explored.[3] These include a technique to fuse flame retardants into products (so no chemicals leak), nanoclays incorporating montmorillonite, an entirely new plastic which produces water when burned called bishydroxydeoxybenzoin (BHDB),[5] and possibly other nanomaterial solutions. Inherently flame-resistant products are ideal, and the aerospace industry uses such plastics, but they are too costly for widespread use.
The annual consumption of flame retardants is currently over 1.5 million tonnes, which is the equivalent of a sales volume of approx. 1.9 billion Euro (2.4 billion US-$).[6]
Mechanisms of function
Endothermic degradation
Some compounds break down endothermically when subjected to high temperatures. Magnesium and aluminium hydroxides are an example, together with various hydrates. The reaction removes heat from the surrounding, thus cooling the material. The use of hydroxides and hydrates is limited by their relatively low decomposition temperature, which limits the maximum processing temperature of the polymers.
Dilution of fuel
Inert fillers, eg. talc or calcium carbonate, act as diluents, lowering the combustible portion of the material, thus lowering the amount of heat per volume of material it can produce while burning.
Thermal shielding
A way to stop spreading of the flame over the material is to create a thermal insulation barrier between the burning and unburned parts. Intumescent additives are often employed; their role is to turn the polymer into a carbonized foam, which separates the flame from the material and slows the heat transfer to the unburned fuel.
Dilution of gas phase
Inert gases (most often carbon dioxide and water) produced by thermal degradation of some materials act as diluents of the combustible gases, lowering their partial pressures and the partial pressure of oxygen, and slowing the reaction rate.
Gas phase radical quenching
Chlorinated and brominated materials undergo thermal degradation and release hydrogen chloride and hydrogen bromide. These react with the highly reactive H· and OH· radicals in the flame, resulting in an inactive molecule and a Cl· or Br· radical. The halogen radical has much lower energy than H· or OH·, and therefore has much lower potential to propagate the radical oxidation reactions of combustion. Antimony compounds tend to act in synergy with halogenated flame retardants. The HCl and HBr released during burning are highly corrosive, which has reliability implications for objects (especially fine electronics) subjected to the released smoke.
Environmental prevalence
In 2009, the U.S. National Oceanic and Atmospheric Administration (NOAA) released a report on polybrominated diphenyl ethers (PBDEs) and found that, in contrast to earlier reports, they were found throughout the U.S. coastal zone.[7]
Health concerns
Flame retardants have faced renewed attention in recent years. The earliest flame retardants, polychlorinated biphenyls (PCBs) were banned in 1977 when it was discovered that they were toxic.[2] Industries shifted to using brominated flame retardants instead, but these are now receiving closer scrutiny. The EU has banned several types of polybrominated diphenyl ethers (PDBEs) as of 2008, 10 years after Sweden discovered that they were accumulating in breast milk.[3] Nearly all Americans tested have trace levels of flame retardants in their body. Recent research links some of this exposure to dust on television sets, which may have been generated from the TV heating up the flame retardants in the TV. Careless disposal of TVs and other appliances such as microwaves or old computers may greatly increase the amount of environmental contamination.[8]
Sudden infant death syndrome
UK scientist Barry Richardson claimed in 1889 that a fungus in bedding broke down the antimony, phosphorus, and arsenic flame retardants in infant bedding to form toxic gases. This research was taken up by New Zealand scientist Jim Sprott, who published a book on it, and eventually aired on The Cook Report in 1994. A 1998 UK government-sponsored study called the Limerick Report found that toxic gases were not created.[9] Sprott maintains that his findings were not refuted.[10]
See also
References
- ^ "Illinois EPA Report on Flame Retardant".
- ^ a b ATSDR. (2001). ToxFAQ PCBs.
- ^ a b c d New Thinking on Flame Retardants, Environmental Health Perspectives, 116(5), May 2008
- ^ Y. Lind, P. O. Darnerud, S. Atuma, M. Aune, W. Becker, R. Bjerselius, S. Cnattingius and A. Glynn (2003). "Polybrominated diphenyl ethers in breast milk from Uppsala County, Sweden." Environmental Research 93(2): 186–194. PMID 12963403
- ^ [UMass "Scientists Create New Plastic"].
{{cite web}}
: Check|url=
value (help) - ^ "Market Study Flame Retardants". Ceresana Research. Retrieved 2009-03-11.
- ^ NOAA. (2009). An Assessment of Polybrominated Diphenyl Ethers (PBDEs) in Sediments and Bivalves of the U.S. Coastal Zone. Free full text. Press release.
- ^ Seattle-Times. (2008) Harmful chemical wafts from your TV. Retrieved Sunday, May 11, 2008.
- ^ "BBC. (1998). Mattresses 'not responsible' for cot deaths".
- ^ "Critique of the UK Limerick Report".